Showing 1 - 24 of 112
New
Features & Benefits
- Delivers the core Power Probe III functionality technicians already trust, enabling direct power and ground application to components for rapid functional testing
- This capability allows technicians to quickly verify component operation, isolate faults, and reduce diagnostic time, improving overall shop efficiency and confidence in repair decisions
- Accurately measures resistance values as low as 1 ohm and as high as 25K ohm's across circuits and components
- This enables precise identification of high-resistance conditions, poor connections, and failing components that may not be detected through voltage testing alone
- Actively loads circuits (+ or -) to verify wiring integrity under real-world conditions. Provides up to 0.5A load on 12V systems and 1A load on 24V systems to expose weak connections, corrosion, or damaged wiring
- Pass/Fail indication is based on a 0.5V voltage drop threshold from battery voltage if voltage drops more than 0.5V under load, audible and visual indicators are disabled, clearly signaling a wiring fault
- (voltage drop values may vary on the size and length of wires, refer to the voltage drop charts as a close example to most accurately predict acceptable voltage drop values
- NOTE: The charts are an estimation based off perfect world scenarios, results may vary)
- Integrated self resetting 10-amp circuit breaker provides increased current capacity for testing higher-load components while protecting both the tool and vehicle circuits. Ideal for powering motors, actuators, and other demanding electrical loads safely.
- Electronically actuated latch allows technicians to apply either momentary or continuous 12V power or ground without holding the switch. This feature enables hands-free operation during extended testing, component activation, or dynamic troubleshooting.
- Replaces traditional alligator clamp with a 4mm banana jack interface for improved reliability and versatility.
- Allows seamless use of extensions, adapters, and test leads while providing a more secure, consistent ground connection in demanding diagnostic environments.
- Features a proprietary 4mm locking banana jack system that securely locks Power Probe accessories in place.
- This ensures reliable electrical connections, prevents accidental disconnection during testing, and maintains PowerProbe-to-PowerProbe accessory compatibility for consistent performance.
- Powerlock technology still allows for the use of any 4mm banana jack accessory universally like all previous generation Power Probe circuit testers.
New
Features & Benefits
- Power Probe 3 combined with the Gold Series Lead Set makes this kit the ultimate in circuit testing diagnosis
- he best sidekick to the PP3 is a kit with different connectors, adapters, and extensions
- The PP3LS01 was designed to increase the usability for the Power Probe 3 while diagnosing electrical circuits
- Integrated self resetting 10-amp circuit breaker provides increased current capacity for testing higher-load components while protecting both the tool and vehicle circuits. Ideal for powering motors, actuators, and other demanding electrical loads safely.
- Electronically actuated latch allows technicians to apply either momentary or continuous 12V power or ground without holding the switch. This feature enables hands-free operation during extended testing, component activation, or dynamic troubleshooting.
- Short Circuit Indicator
- Relay and Component Tester
New
Features & Benefits
- Delivers the core Power Probe III functionality technicians already trust, enabling direct power and ground application to components for rapid functional testing
- This capability allows technicians to quickly verify component operation, isolate faults, and reduce diagnostic time, improving overall shop efficiency and confidence in repair decisions
- Accurately measures resistance values as low as 1 ohm and as high as 25K ohm's across circuits and components
- This enables precise identification of high-resistance conditions, poor connections, and failing components that may not be detected through voltage testing alone
- Integrated self resetting 10-amp circuit breaker provides increased current capacity for testing higher-load components while protecting both the tool and vehicle circuits. Ideal for powering motors, actuators, and other demanding electrical loads safely.
- Electronically actuated latch allows technicians to apply either momentary or continuous 12V power or ground without holding the switch. This feature enables hands-free operation during extended testing, component activation, or dynamic troubleshooting.
- Replaces traditional alligator clamp with a 4mm banana jack interface for improved reliability and versatility
- Allows seamless use of extensions, adapters, and test leads while providing a more secure, consistent ground connection in demanding diagnostic environments
- Features a proprietary 4mm locking banana jack system that securely locks Power Probe accessories in place
- This ensures reliable electrical connections, prevents accidental disconnection during testing, and maintains PowerProbe-to-PowerProbe accessory compatibility for consistent performance
- Powerlock technology still allows for the use of any 4mm banana jack accessory universally like all previous generation Power Probe circuit testers.
New
Features & Benefits
- 10A HBC 1000V FF Fuse
- High Breaking Capacity of 30kA
- Very Fast Acting
- AC/DC Current: 10A
- AC/DC VOltage: 1000V
- Dimensions: 0.41" x 1.50"
New
Features & Benefits
- 440mA HBC 1000V FF Fuse
- High Breaking Capacity of 10kA
- Very Fast Acting
- Dimensions 0.24" x 1.26"
Features & Benefits
- Isolate and locate parasitic draw by finding current flow on fuses
- The top of the tool shows inactive, active, or open for quick fuse diagnosis.
- Accurately measures current without removing the fuse
- Ability to read Maxi, Mini, & ATC fuses up to 80 A
- Belt clip
- Work Light
- Replaceable tips
- USB-C rechargeable
Features & Benefits
- Replacement tungsten Power Probe tip for all current Power Probes with removal tip
- Standard 4 mm banana jack
- Long lasting Tungsten tip
- Provides highly stabilized readings
Features & Benefits
- DC voltmeter indicators provide active feedback
- Bad ground indicator
- Relay and component Tester
- DDM is CAT-IV hybrid safe
- Digital volt and ohmmeter for circuit testing
- Measures frequency for sensor testing
- Included K-Type temp probe allows for temperature readings
Features & Benefits
- Power Probe 3 is a digital multimeter that provides diagnostic power with the flip of a switch
- Determine if motors, lights, fans, relays and circuits are operational on and off the vehicle by applying battery power or ground through the tool
- Easy-to-read dual polarity indicators feature a red (+) symbol to indicate positive voltage and a green (-) symbol to indicate ground
- Operates on 12-24 volt systems
- Resettable 8-amp circuit breaker
- Standard 20' cable
- 20' extension cable
Features & Benefits
- EFFICIENT. Supplies power through OBDII connector and monitors the vehicle's electrical system for parasitic draw
- RELIABLE. Serves as a memory saver during battery replacement
- VERSATILE. Capable of delivering up to 10 amps continuous current through Smart battery output
- INNOVATIVE. Graphing mode for displaying voltage and Amperage as a wave form
- CONNECTED. View and record data via Bluetooth on Power Probe Link App
- USER-FRIENDLY. USB-C rechargeable high capacity Lithium Ion Battery and TFT multi color display
- ADJUSTABLE. Easily adjust current output alarm and auto power off settings
Features & Benefits
- AC / DC 750V capability
- CAT III 1000V/CAT IV 600V
- Dual display for ACV measuring with Frequency
- 2K Ohms Resistance range
- 1K Hz Frequency Counter
- Integrated single pole test for phase detection
- 2,000 count digital display
- IP65 for outdoor use
Features & Benefits
- Used with Power Probe to measure applied amperage
- Displays MIN/MAX values
- Reads up to 20 amps
- Accurately test circuits or components for excessive amperage draw
- Minimum display value 1 Millamp
- Backlit LCD Display
Features & Benefits
- Accurately apply a pulse width modulated (PWM) signal with any Power Probe
- Simulates PWM signals used on modern automotive electronics
- Test PWM driven components safely and accurately
- Backlit LCD Display
Features & Benefits
- Performs running, residual, rail and flow rate pressure tests
- Professional dual scale gauge reads 0-100psi and 0-700kPa with relief valve and fuel discharge hose and protective rubber boot
- Includes adapters, hoses and fittings to test fuel injection systems plus two popular adapters for import vehicles, as well as the GM TBI adapter
- New threaded style dual-manifold T-bar for threading directly onto gauge hose
- Common thread sizes: M12 x 1.5, M12 x 1.25, M8 x 1.0, Ford specific (1/8-27), GM TBI specific (M16 x 1.5)
Features & Benefits
- EASY TO USE. Cordless circuit tester for DC circuits with voltages between 3 and 28 volts
- NO GROUND CABLE REQUIRED. Simply use a free hand to contact and act as a ground
- SIMPLE IDENTIFICATION. Illuminates and sounds when voltage is detected
- SAFE TO USE. Use on ECM's, computers sensors and airbags without issue
- V-TIP DESIGN. Easily pierce insulation, circuit tester will beep and vibrate when touching positive voltage
- Simple alkaline battery powered
Features & Benefits
- Power Probe 3 is a digital multimeter that provides diagnostic power with the flip of a switch
- Determine if motors, lights, fans, relays and circuits are operational on and off the vehicle by applying battery power or ground through the tool
- Easy-to-read dual polarity indicators feature a red (+) symbol to indicate positive voltage and a green (-) symbol to indicate ground
- Operates on 12-24 volt systems
- Resettable 8-amp circuit breaker
- Standard 20' cable
- Component Tester
- Active LED Lighting for illuminating workspace
- Power cable length of 20'
Features & Benefits
- Digital circuit tester checks 6, 12, 24 and 48V systems
- Digital display to read the accurate voltage value
- LCD indicator for easy power (red) and ground (green) identification
- Stainless steel testing probe
- Includes a spring cable which is able to extend to 12' for maximum reach
- CE Approved
Features & Benefits
- EZ Diagnostics software, teaches the user how to perform common diagnostic applications on a vehicle
- EZ Learning software teaches the user how to operate the tool
- Determine if motors, lights, fans, relays or circuits are operational on and off the vehicle by applying battery power or ground through the tool
- Flip screen mode displays readings at 180°
- Menu driven navigation
- Easy-to-read dual polarity indicators feature a red (+) symbol to indicate positive voltage and a green (-) symbol to indicate ground
- Listen to AC signals or radio circuits
- Resettable 8-amp circuit breaker
- Operates on 12-24 volt systems
- Standard 20' cable
- 20' Extension Cable
- Accessory Outlet Adapter
- Blow Molded Carrying Case
Features & Benefits
- EZ Diagnostics software teaches the user how to perform common diagnostic applications on a vehicle
- EZ Learning software teaches the user how to operate the tool
- Determine if motors, lights, fans, relays or circuits are operational on and off the vehicle by applying battery power or ground through the tool
- Flip screen mode displays readings at 180°
- Menu driven navigation
- Easy-to-read dual polarity indicators feature a red (+) symbol to indicate positive voltage and a green (-) symbol to indicate ground
- Listen to AC signals or radio circuits
- Resettable 8-amp circuit breaker
- Operates on 12-24 volt systems
- Standard 20' cable
Features & Benefits
- Comprehensive compression testing set for most gasoline engine applications including import, domestic, motorcycles, marine and small engines
- Master set contains a high quality gauge (0-300psi (0-2000 kPa)) with rubber boot, long 25" flex hose with quick release fittings, pressure relief valve, (4) 12" long hoses in 10mm, 12mm and 14mm plus adapters
- Adapters provided are for use on both tapered and flat seat plugs. Set also includes long steel, deep well steel adapters in 14mm and 16mm for deep recessed plugs found in some engines like in the Ford Triton
Features & Benefits
- Kit includes 14mm/18mm hose and 10mm, 12mm and 14mm deep adapters
- High quality 0-300psi Matco gauge with pressure relief valve and quick coupler
- Includes spare parts kit and pouch for convenient storage
Features & Benefits
- 5' color coded leads made of heavy-duty oil and grease resistant 12 gauge wire allows one person to start and crank the engine under the hood or to the side of the vehicle
- Red indicator light glows when red lead is connected to the battery to indicate a hot circuit and goes off when switch is depressed
- Heavy-duty push button switch and leads are rated to 40A and 12V, or 20A at 24V
- Durable construction ensures reliable operation and a long service life
Features & Benefits
- Quickly and easily diagnose engine problems with this noid light and IAC tester set
- This easy to use kit lets you check your engine for issues in the electrical fuel injection system, spark plug circuits or idle air control (IAC) valve in both no-start and stalling engines
- The test kit is suitable for testing GM TBI, GM SCPI, GM PFI, GM MULTEC2, BOSCH2, FORD TBI, GEO TBI and BOSCH PFI systems
- One IAC signal test lights for GM TBI and PFI fuel injection system, and one for GM Model 1987 or newer GM Model 700 TBI and PFI fuel injection system
- Set includes: 8 Noid lights for testing GM PFI, FORD TBI, GEO TBI, BOSCH PFI, GM TBI, GM SCPI, GM MULTEC 2 and BOSCH 2
Features & Benefits
- Versatile tester with internal power source that allows for use with live and non-live 6V, 12V, and 24V DC systems
- Easy detection with patented edge-lighting that allows the entire handle and logo to illuminate red when power is detected and green when grounded
- Uses 16340 type lithium battery