Showing 1 - 24 of 80
New
Features & Benefits
- Specially designed to remove racing lugnuts quickly
- Will not jam lugnuts during removal and installation
- Use on longer wheel studs and deeper off-set wheels
- Use with 1/2" drive Impact Wrenches
- Maganese Phosphate coating to resist corrosion
New
Features & Benefits
- Used for Installation and Removal of Normal, Damaged or Corroded Nuts.
- Double-ended design features a 6-point hex on one side and left-hand twist spiral with sharp edges on the other side, that firmly bite stripped nuts without slipping.
- Impact rated sockets are chrome moly steel.
- Includes:3" long 1/2" drive extension, 17mm, 18mm, 19mm, 21mm, 22mm, 24mm and 27mm.
Features & Benefits
- CONTROL ARM ADJUSTMENT. The kit includes 5 Cam adjusting holding tools to adjust the Control Arm Cams found on Chevrolet and GMC vehicles
- EASY ACCESS. The holding tool surrounds the entire perimeter of each cam to provide a no-slip work area when moving the hard-to-reach and often rusty OEM cams on 1999 and newer GM 1/2, 3/4, and 1 ton vehicles with coil spring front suspensions
- USE UNDER THE VEHICLE. The 14-1/2" long 21mm/24mm wrench can be conveniently used from the bottom side of the vehicle instead of reaching through the wheel well which saves technician’s time
- VERSATILE. Holding tools also work with 27mm applications and can be used with a standard wrench or socket
Features & Benefits
- FIRMLY BITE STRIPPED NUTS. Left-hand twist socket has a sharp edges which firmly bite into the stripped nuts
- IMPACT RATED. Socket are impact rated and made from chrome moly steel
- 3/4” square drive
Features & Benefits
- DAMAGE FREE. 6-point hex socket grips fastener without damaging or rounding
- IMPACT RATED. Socket are impact rated and made from chrome moly steel
- 3/4” square drive
Features & Benefits
- EFFORTLESS USAGE. Safely remove and install six-hole rear axle locknuts on 2006-2014 1500-5500 model Dodge®/Ram® trucks
- SECURE FIT. Application-specific design enhances connection with locknuts, reducing slip and potential damage risks
- ROBUST CONSTRUCTION. Crafted from solid steel, fortified with a corrosion-resistant manganese phosphate finish, ensuring lasting durability
- COMPATIBLE. Utilizes a 3/8" square drive
- DIRECT REPLACEMENT. Designed as a substitute for Mopar® part number 8954A
Features & Benefits
- EXTENSIVE KIT FOR AUDI AND VOLKSWAGEN. 23 piece factory reproduced master wheel lugnuts key/bolt kit
- VERSATILE. Works on all Volkswagen/Audi factory wheel lugnuts locks from 1996 to 2012
- Not recommended for use with impacts and air hammers
Features & Benefits
- Dual 1/2" drive flip sockets in 21 & 21.5mm sizes
- For missing or distorted chrome lugnut caps and swollen or otherwise damaged and no longer factory sized lugnuts
- New design with smaller outside diameter for fitting into more applications
Features & Benefits
- Dual 1/2" drive flip sockets in 22 & 22.5mm sizes
- For missing or distorted chrome lugnut caps and swollen or otherwise damaged and no longer factory sized lugnuts
- New design with smaller outside diameter for fitting into more applications
Features & Benefits
- Dual 1/2" drive flip sockets in 6 different half millimeter increment lugnut sizes
- For missing or distorted chrome lugnut caps and swollen or otherwise damaged and no longer factory sized lugnuts
- New design with smaller outside diameter for fitting into more applications
- Includes sizes: 18.5mm/19.5mm, 21mm/21.5mm and 22mm/22.5mm
- Durable forged CR-MO design, includes knock-out punch. Use with most 1/2" drive 3" impact extensions
Features & Benefits
- Dual 1/2" drive flip sockets in 18.5 & 19.5mm sizes
- For missing or distorted chrome lugnut caps and swollen or otherwise damaged and no longer factory sized lugnuts
- New design with smaller outside diameter for fitting into more applications
Features & Benefits
- Drill bit for LT1350
Features & Benefits
- Easily removes both manufacturer and aftermarket hubcap and wheel locks
- Fits GM, Ford and Chrysler as well as many aftermarket locks
- Components plus a 3" extension give you the most coverage
Features & Benefits
- Rounded and hex locknut socket set, 1/2" drive for ratchets and breaker bars
- Set includes 55mm hex, 2-3/8" rounded hex, 2-3/8" hex, 2-1/2" rounded hex, 2-1/2" hex, 2-9/16" rounded hex and 2-3/4" rounded hex
- Applications include Toyota® FJ, LN, RN, Ford® F-150, 250, 350, Ranger, Bronco, Explorer, Dodge® Ram and more
- Set comes in blow-molded case
Features & Benefits
- Extra deep 1-1/16" socket is used on the 30/36 spring brakes found on Freightliner and Peterbuilt dump trucks and garbage trucks
- Forged from tough alloy steel to increase safety and heat treated
- Use with a 1/2" drive and can be used with an impact wrench
Features & Benefits
- Patented design allows removal of bolts and nuts up to 90% rounded by biting exclusively into the flats, only griping tighter with each impact
- Use to remove rusted and rounded hex bolts and nuts and install new fasteners
- 22mm (7/8”) outside hex body for low profile use when paired with a wrench
- Lifetime warranty, forged and heat treated CRO-MO
Features & Benefits
- 10 piece wheel lock removal key set
- Covers 10 of the 60 Mercedes Benz factory master wheel lock keys
- Duplicate of master key guides
- Not to be used with impact hammer
Features & Benefits
- New patented design removes up to a 90% rounded hex lug nut
- Design uses angled teeth to bite exclusively into the flat sides of a lug nut, ignoring rounded points and only getting tighter as you impact
- Features spinning protective sleeves that remain stationary while socket spins to avoid scuffing wheels, or remove sleeves for tighter clearance
- Set includes 1/2" drive 17mm, 19mm (3/4"), 21mm (13/16") and 22mm lug nut sockets
- For use with damaged and rounded hex shaped 6 sided (standard) lug nuts and lug studs
- Will not work on tamper proof lug nuts
Last Chance
Features & Benefits
- Factory duplicate with factory part numbers
- 20 piece kit works on 2006 to 2016 models
Features & Benefits
- Second generation Lug Ripper
- Easily drill out stripped/broken lugnuts in minutes
- Tungsten steel drill bit with 4 carbide cutters for speed and durability
- 4 drill guides will not damage wheel rim
- Locking collar clamp secures drill guide to lugnut
- Packaged in custom blow molded case
Features & Benefits
- Works on 2012 to present Mercedes S-Class vehicles
- Fits Mercedes wheel lug bolt part #000 990 5407
Features & Benefits
- 20 piece wheel lock master key set
- Removes all 2nd generation 2012 to present BMW factory wheel lugnuts locks
- Identical to factory set - uses same factory part numbers
- Cannot be used with air hammers
Features & Benefits
- 20 piece wheel lock master key set
- Removes all 2nd generation 2009 to present VW factory wheel lugnuts locks
- Identical to factory set - uses same factory part numbers
- Cannot be used with air hammers
Features & Benefits
- Duplicate factory lugnuts keys
- 21 Piece BMW kit fits all internal spline drive locks for years 1996 to 2012
- Cannot be used with air hammers