Showing 1 - 24 of 32
Features & Benefits
- AGGRICULTURAL APPLICATION DESIGN. Wrench is designed to loosen plastic retaining rings on AGCO and John Deere diesel fuel filter canisters
- EASY ACCESS. Low-profile half moon design with 3/8 square allows tool to work in tight spaces
- ULTRA STRONG. Heat-treated material provides extra strength
- Made in USA
- PRODUCT DIMENSIONS. 4.25 x 4.25 x 0.25 inches
Features & Benefits
- Allows the engine crank to be manually adjusted when working on Kenworth T880 and Paccar MX-13 engine
- Allows pinpoint accuracy calibration on Kenworth and Peterbuilt trucks
- 1/2" square drive
Features & Benefits
- 36mm 12-point wrench is for turning a 2001-present Duramax motor over from the bottom side of vehicle
- When a pickup is on the hoist you turn the motor over to loosen the torque converter bolts
- The offset allows clearance for stabilizer bar and you can do all the work from the bottom
- Tool is 22-1/2" long with a double dip grip
Features & Benefits
- Specially designed wrenches for removing and replacing the main filter collar on aftermarket diesel fuel filter systems.
- The tool has 100% engagement around the ring with a 3/8” square drive design which allows easier access to the fuel filter.
- High strength steel prevents the wrench from flexing while loosening stubborn filter collars.
- 8" wrench works Detroit Diesel DD13, DD15 and DD16 engines found in Paccar, Daimler Trucks North America, and Volvo.
Features & Benefits
- Specially designed wrenches for removing and replacing the main filter collar on aftermarket diesel fuel filter systems.
- The tool has 100% engagement around the ring with a 3/8” square drive design which allows easier access to the fuel filter.
- High strength steel prevents the wrench from flexing while loosening stubborn filter collars.
- 6" wrench works on any diesel engines found in Caterpillar CT660, CT11, CT13, CT15, Cummins, Detroit Diesel, International, Mercedes Benz, Paccar, Daimler Trucks North America, Kenworth, Mack, Navistar, Peterbilt, Thomas Built Buses and Volvo.
Features & Benefits
- Double ended wrench removes and installs vent cap on top of canister
- The tool has 100% engagement on the cap to eliminate a chance of breaking the teeth off on the cap.
Features & Benefits
- Helps locate air leaks in turbo system components by plugging the output side of the turbo and the intake inlet
- Air is applied through one adapter to show the presence of leaks within the system
- Four pairs of stepped adapters to fit most turbo systems on light-duty trucks and Class 7 & 8 Semis
- Smoke adapter allows the ability to introduce smoke to the in turbo tester, providing a second visual test
- Can also be used on some cooling system hoses
- Includes pressure gauge, shut off valve and pressure regulator
- Adapters range from 75mm to 110mm
Features & Benefits
- Fits 2011 to current model 6.7L Power Stroke
- Pulls the injector straight out of the engine
- Lifts about 3/4" to completely remove a stuck injector
- Saves time by reducing the likelihood of damaging the head or injector
- Made from heat treated alloy steel for rigidity and durability
Features & Benefits
- Used to remove the cylinder liners on Caterpillar, Cummins, Detroit Diesel and Volvo D13 engines
- Spring loaded arms adjust to fit the liner automatically
- Includes longer threaded shaft and arms, along with inserts for Detroit Diesel liners
Features & Benefits
- Removes fuel rail pressure sensor on 2006 to 2010 Duramax LBZ and LMM diesel engines
- Saves more than 1 hour depending on engine/vehicle model
- Reduces the amount of components that need to be removed to service the sensor
- Swinging handle for increased mobility
- Compact socket head fits in tight spaces
Features & Benefits
- For removing and installing the wire harness on the glow plug connectors in the 6.0 Ford diesel engine
- Made of stainless steel for rigidity and durability with a thumb tab and textured high visibility grip to get a better grip on the tool when removing the harness
- Sometimes the harness is fragile and can break easy, and with a better grip, the tech will have more control when removing the harness, lessening the chance of breakage
- Also with the textured grip, it’s easier to use with oily hands
Features & Benefits
- Used to plug the top of the oil filter when changing the oil on '13-'17 Ram Cummins 2500/3500 heavy duty trucks
- Eliminates the mess, and the T-handle makes removal and installation easier
- Allows the technician to pre-lube the filter before installation
Features & Benefits
- Tough, stainless steel band with permanently bonded textured coating for superior gripping power that won't slip
- Fits most John Deere tractors and also works on some Case, Case/IHC, Allis Chalmers tractors and other farm implement products with a range 4-3/4" to 5-3/16"
- "Swivel Grip" handle makes it easy to turn in tight spots
- Handle is made of tubular steel for added strength and comes with a non-slip double dip drip
Features & Benefits
- Allows easy access to hard to reach DEF line connectors
- Two sided design allows for straight and 90° access
- Three different sizes
- Made out of 1/4" precision laser cut steel
- For use with Ford and Dodge pick-ups
Features & Benefits
- Designed to release the fuel line connectors on the CUMMINS ISB, ISX engine family
- Two piece design allows easy access for Cummins fuel lines
- Straight and 90° forks allow access to wide range of connectors found on the motor
- Made from precision laser cut 1/4" steel
- Designed with .250" thickness for correct fit
Features & Benefits
- Made from precision cast 4140 chromoly
- Specially designed 6 point engages all 6 points at same time
- Straight version allows precision re-torque with torque wrench
- Offset version allows additional clearance in tight areas
- 13mm, 14mm and 17mm fits all major EGT sensors on the market
Features & Benefits
- Sockets are designed to remove NOX and particulate matter (SOOT) sensors
- Often these sensors become very difficult to remove without destroying them because of heat cycles and the corrosive environment of the modern diesel exhaust system
- Designed to drive all 6 sides of the hex equally to reduce the chance of damage
- Crows foot for easy access to most locations
- 1/2" square drive for high breakaway torque
- Works on Chrysler, 3.0L V6 diesel, Jeep Grand Cherokee diesel motor, Dodge Ram 1500 with diesel motor
Features & Benefits
- Two tools in one: one end is designed to fit the odd shaped 40mm 12 sided sensor found on 2001 to 2010 trucks; the other end fits the 42mm 6 sided sensor on 2011 to current trucks
- Used every time a fuel filter is replaced due to the plastic sensor that can easily be damaged by using pliers and other nonspecific designed tools
Features & Benefits
- For use on Paccar's new frame, mounted primary fuel filters on 2010 and later Kenworth and Peterbilt trucks
- Half-moon design allows easier access to the fuel filter
- Laser cut steel material provides strength to loosen even the toughest threaded bowls
Features & Benefits
- Removes diesel injectors from GM vehicles produced from 2001 to 2004 with an LB7 Duramax engine
- Pulls the injector straight out of the full length of the nozzle tip without rocking, which reduces the possibility of unwanted sleeve removal, saving up to 1/2 hour
- Removes sleeve from injector without damage
Features & Benefits
- Designed to be used on a Davco 242/243 aftermarket fuel filter system
- Designed to loosen the filter vent cap on top and the main filter collar
- Half-moon design provides easier access to the fuel filter and is made of high strength steel that prevents wrench from opening when loosening collar
Features & Benefits
- Designed to be used on a Davco aftermarket fuel filter system
- Designed to loosen the filter vent cap on top and the main filter collar
- Half-moon design provides easier access to the fuel filter and is made of high strength steel that prevents wrench from opening when loosening collar.
- Any Detroit diesel DD13, DD15 and DD16 engines found in Paccar, Daimler Trucks North America and Volvo
Features & Benefits
- Designed to be used on Davco aftermarket fuel filter system
- Designed to loosen the filter vent cap on top and the main filter collar
- Half-moon design provides easier access to the fuel filter and is made of high strength steel that prevents wrench from opening when loosening the collar
- Diesel engines found in Caterpillar CT660, CT11, CT13, CT15, Cummins, Detroit Diesel, International, Mercedes Benz, Paccar, Daimler Trucks North America, Kenworth, Mac, Navistar, Peterbilt, Thomas built buses and Volvo
Features & Benefits
- For use on International Maxx Force series 11 and 13 engines
- Properly sized to effectively depress each side of the fuel release tabs