Showing 1 - 22 of 22
New
Features & Benefits
- HEAVY-DUTY PRESS. Industry leading proprietary alloy fully forged C-frame press takes on tough jobs to safely remove and install press-fit ball joints, U-joints, and brake anchor pins
- COMMON COVERAGE. Includes parts needed to service common ball-joints and 4WD vehicles including ½ and 3/4" Domestic trucks, Dana 44 front axles and more
- DURABLE PARTS. High hardness forged adapters and plates and high grade coarse thread 1-1/8" thread drive screw, apply grease during use
- LIFETIME WARRANTY. Ball joint service tool kit comes with a worry-free lifetime warranty
Features & Benefits
- EXPERT BALL JOINT REMOVAL. Set includes 5 forged alloy steel pickle forks used to remove shock linkage, tie rods and ball joints
- DURABLE. Design ensures durability, rigidity, and complete transfer of hammering forces
- COMPREHENSIVE SET. Works on a variety of general services on many cars and light trucks
- INCLUDES MOST POPULAR SIZES. Includes 11/16", 15/16", 1-1/8", 1-3/8", and 1-5/8" opening pickle forks
Features & Benefits
- Designed specifically for use with the BJP18100 Ball Joint Press and locks in place on the rocker assembly
- Provides required support when installing Dodge 4500/5500 ball joints
- Unique adapter accommodates complex axle housing geometry
- Also works on 2008-2014 Dodge Ram and Dodge Sterling trucks
- Made from high-quality heat-treated alloy steel with black oxide finish
Features & Benefits
- Used for breaking free steering knuckle/suspension joints using an impact hammer
- Nut must be threaded all the way onto knuckle/suspension joints threaded shafts
- Can be used to remove Honda, Lexus and Toyota Wheel Studs
- Sizes included: M10x1.5, M12x1.25, M12x1.5, M14x1.5, M14x2.0, M16x1.5, M16x2.0 and M24x1.5
Features & Benefits
- Designed specifically for GM 2500 and 3500 pickups with steel lower A-arms
- Precision machined from alloy steel, heat treated for strength and durability
- Kit includes 4 cups total - 2 cups for removal and 2 cups for installation
- Easy to install and remove - cups lock in place with Schley proprietary design
- Kit was designed for use with BJP18100 Ball Joint Press
Last Chance
Features & Benefits
- Most versatile ball joint kit includes 25 connected adapters covering more than 600 vehicle models
- Largest forged C-frame throat available (9" spread x 2-3/4" reach), provides plenty of clearance for largest press-fit ball joint applications
- Connected adapter feature allows adapters to be captured on either end of the C-Frame, leaving the hands free to simply hold the assembly and operate an air impact
- Connected adapter feature allows adapters to be captured on either end of the C-Frame, leaving the hands free to simply hold the assembly and operate an air impact
- Design features patented, secure click-in adapters that are captured by ball detents for quick and easy installation and removal
- Fully compatible with ball joint cups and adapters from MST6529, MBJA20, LUBJP, BJP7025C and MST6539 kits
- Includes complete comprehensive application guide, application charts and detailed procedural diagrams with part number call outs
- No O-rings to replace, buy or lose
Last Chance
Features & Benefits
- Storage case capable of holding the connected adapter C Frame and 25 adapters
- Includes lid decals and laminated adapter location card
Last Chance
Features & Benefits
- The connected adapter feature allows adapters to be captured on either end of the C-Frame, leaving the hands free to simply hold the assembly and operate an air impact
- Largest forged C Frame throat available (9 spread x 2-3/4 reach), provides plenty of clearance for largest press-fit ball joint applications
- Features sockets for which the connected adapters plug into and are captured by ball detents for quick and easy installation and removal
- This OTC embossed C-Frame design not only accepts the new connected adapters, but will work with any of the current standard adapters as well, complimenting existing ball joint sets
Features & Benefits
- For relieving tension from the torsion bar arm and key, allowing the user to safely remove the torsion bar
- Utilizes a larger C-frame design to increase the application range for more vehicles
- Includes an adapter for non-GM applications
- GM Applications: 1988 and up GMC and Chevrolet 1/2-ton, 3/4-ton and 1-ton trucks; 2011 and up GM HD trucks, S-10 Blazers, S-15 Jimmys and 4WD trucks with 4.3L engines; GM K-3500 series with HD chassis, including GM 5-lug, 6-lug and 8-lug vehicles
Features & Benefits
- Extra-large forged C-frame ball joint press for jobs that require more throat space or multiple adapters
- Works with your current ball joint service and adapter sets (BPS400, MBP1000, MBJA20 and more)
- Includes install and removal plates and long and short drive screws to minimize overall length where convenient
- Three times the remaining throat space when using standard plates and cups compared to standard presses
- 12" overall length, 9" opening
Features & Benefits
- 20 piece set includes adapters from Master Ball Joint Set MBP1000 as well as 6 new adapters
- 6 new adapters expand the application range to include additional Dodge, GM, BMW, Toyota models and more
- Pairs well with BPS400 and LUBJP, or with most ball joint C-frame presses
Features & Benefits
- This ball joint cup kit is designed to remove and install ball joints on late model Ford and Dodge full-size pickup trucks
- Precision machined from high quality heat treated 4140 alloy steel
- Designed for use with the BJP18100 ball joint press
- Each cup features a special design that keeps them locked in place during use
- Nine cup sizes accommodate late model Ford and Dodge pickups as well as other vehicle applications
Features & Benefits
- The ball joint press design of this patented tool provides plenty of clearance between the frame, pivot link and cups
- Powerful 2:1 leverage removes and installs large ball joints on most vehicles including full-size pickups
- Proprietary design keeps BJP18100C cups locked in place during use
- Universal adapters included enable other popular cup sets to be utilized with the ball joint press
- Measures approximately 12" W, 10" H, 2.5" D and weighs approximately 25 lbs. fully assembled
- Frame members are made of forged 4140 alloy steel for ultimate durability
- Patented design provides ample clearance to service ball joints on the vehicle
Features & Benefits
- For rusted and difficult to remove "bolt-in" style Subaru ball joints
- Save time by using a 24mm wrench, impact wrench or most slide hammers to quickly remove lower ball joints
- For 1990 to current Subaru models including Baja, Forester, Impreza, Legacy and Outback
- Unique anti-rotation slide pin design pulls directly back on the ball joint without rotating, reducing the chance of ball joint separation
- Includes 5/8-18" adapter ball joint stud adapter for use with included pulling cup or your own slide hammer
Features & Benefits
- Needed to release the tension on front torsion bars for front end and suspension service
- Designed to work on '88 to '03 GM 1/2, 3/4 and 1-ton trucks, heavy-duty K-3500 series trucks, S-10 Blazer, S-15 Jimmy 4WD with 4.3L V-6, Oldsmobile Bravada and more
- Fits into the frame and the torsion bar mount
- Professional-duty forged frame and hardened alloy drive bolt for long lasting use
Features & Benefits
- Needed to release the tension on front torsion bars for front end and suspension service
- Larger for working on 2011 and up GM 1-ton, heavy-duty ¾-ton 2WD and 4WD trucks
- Fits into the frame and the torsion bar mount
- Professional-duty forged frame and hardened alloy drive bolt for long lasting use
Features & Benefits
- Very rugged, flat design of ball joint separator kit with 3 interchangeable forks
- Completely drop-forged
- Comes with "Vibro Impact" spindle
- Fork sizes of 24mm, 27mm and 31mm
- Jaw capacity ranges from 30mm-65mm
Features & Benefits
- For the removal and installation of press-fit ball joints
- Includes all the receiver tubes and removing/installing adapters needed to work on press-fit upper and lower ball joints
- Applications include domestic, foreign and European cars and trucks with included guide providing further details or fitment on over 1,250 applications
- C-frame press alone can be used to remove and replace universal joints
Last Chance
Features & Benefits
- 3 piece set contains the 4-wheel drive installation and removal adapters that are used for press-fit parts such as ball joints, universal joints and truck brake anchor pins
- Adapters allow service for 1967 through current 1/2 and 3/4 ton 4WD vehicles having the Dana 44 front axle found on Ford, GM, Dodge, IHC and Jeep vehicles
Last Chance
Features & Benefits
- Heavy-duty tool for removal and installation of press-fit parts, such as ball joints, universal joints and truck brake anchor pins
- Set contains: C-frame press, 3 receiver tubes: 2-3/4" x 3", 2-1/4" x 2-1/2" and 1-3/4" x 2"
- Set also includes 4-wheel drive ball joint service kit for 1967-current 1/2- and 3/4-ton 4WD vehicles having the Dana 44 front axle found on Ford, GM, Dodge, IHC and Jeep vehicles
- Lifetime warranty
Features & Benefits
- Kit for domestic and import press-in ball joints on the following truck/van/SUV makes:
- Toyota, Hyundai, KIA, Infinity, Isuzu, Nissan, Chrysler, Dodge, Jeep, Plymouth, Mitsubishi, Ford, Lincoln, Mercury, Mazda, Chevrolet, GMC and Hummer
Last Chance
Features & Benefits
- Large heavy-duty C-Frame Ball Joint Press required for use with MST6735 Sprinter Van Ball Joint Kit
- When used with FU6730 Update Kit, you can expand the applications of BJP7025C, OTC7918 and MST6530 Ball Joint Kits