Showing 1 - 24 of 100
New
Features & Benefits
- HEAVY-DUTY PRESS. Industry leading proprietary alloy fully forged C-frame press takes on tough jobs to safely remove and install press-fit ball joints, U-joints, and brake anchor pins
- COMMON COVERAGE. Includes parts needed to service common ball-joints and 4WD vehicles including ½ and 3/4" Domestic trucks, Dana 44 front axles and more
- DURABLE PARTS. High hardness forged adapters and plates and high grade coarse thread 1-1/8" thread drive screw, apply grease during use
- LIFETIME WARRANTY. Ball joint service tool kit comes with a worry-free lifetime warranty
New
Features & Benefits
- Designed to provide the safest method to remove tie rods without risk of damage to threaded areas, rubber seals and grease nipples
- Set includes most popular sizes: 7/8"-14, 3/4"-16, M20-1.5
- Manganese Phosphate coating resists corrosion to increase life of the tool set
- Set includes tie rods commonly found on class 3-8 trucks and equipment
New
Features & Benefits
- Used to remove automotive yokes on drive shafts and transmissions
- Reduces the risk of damaging yokes
- Made from high quality steel
- Used on Ford® F150/F350, Chevrolet® 1500/3500, Dodge® RAM 1500/3500
Features & Benefits
- V-jaw design works around strut bolts
- Use on split hubs and knuckles with either the bolt removed or when the bolt has been loosened but is difficult to remove due to space or corrosion
- Low profile for even the tightest clearances, with a working range of less than 3/16" to more than 3/8"
- Specialty hardened tool steel jaws and cro-mo body
Features & Benefits
- COMPREHENSIVE SET. Features eight heavy-duty metric sockets that fit axle nuts and automatic transmission tail output shafts on Toyota, Lexus, Chrysler, Dodge, Jeep, Audi, Volkswagen, and BMW as well as many other makes
- EASY STORAGE. Set comes in a blow molded case for convenient storage in any toolbox blow molded case
- DURABLE. Heavy Duty Steel construction
- Includes socket sizes: 29mm, 30mm, 32mm, 34mm, 35mm, 36mm, 38mm, 39mm
Features & Benefits
- COMPREHENSIVE SET. Features eight heavy-duty metric sockets that fit axle nuts and automatic transmission tail output shafts on Toyota, Lexus, Chrysler, Dodge, Jeep, Audi, Volkswagen, and BMW as well as many other makes
- EASY STORAGE. Set comes in a blow molded case for convenient storage in any toolbox blow molded case
- DURABLE. Heavy Duty Steel construction
- Includes socket sizes: 29mm, 30mm, 32mm, 34mm, 35mm, 36mm, 38mm, 39mm
Features & Benefits
- Removes and installs the hub nut on 2020 and newer Silverado and Sierra 2500/3500 HD truck with 11.5“ & 12” dual rear wheel (DRW) axle hubs
- The full-floating hubs are held onto the axle carrier by a circular nut, which has reliefs for a socket to engage and drive the nut for removal and installation
- The harden socket has a 1/2" drive size with black oxide finish
Features & Benefits
- Remove and install rear axle retaining nuts on Dodge Ram heavy-duty trucks
- Fits rear hubs on Ram 2019 and up 3500 dual rear wheel trucks, 4500, 5500 (D2, DD, DP) chassis cab trucks
- 1/2" female drive use with ratchets, breaker bars and torque wrenches
- The 1/2" drive 12 pin rear axle hub nut socket, is designed to remove and install rear spindle hub nuts on 2019-current Dodge Ram 3500 Dual rear wheel drive trucks, 4500 and 5500 chassis cab trucks. (Fits D2, DD, DP)
- 1/2" drive design for use with a ratchet, breaker bar and torque wrench
Features & Benefits
- EXPERT BALL JOINT REMOVAL. Set includes 5 forged alloy steel pickle forks used to remove shock linkage, tie rods and ball joints
- DURABLE. Design ensures durability, rigidity, and complete transfer of hammering forces
- COMPREHENSIVE SET. Works on a variety of general services on many cars and light trucks
- INCLUDES MOST POPULAR SIZES. Includes 11/16", 15/16", 1-1/8", 1-3/8", and 1-5/8" opening pickle forks
Features & Benefits
- 4 POSITION FEATURE. Tie rod adjusting tool has four different positions that allow it to easily locate and grip a variety of tie rod sleeves properly
- 360° ROTATION. Allows 360° rotation of sleeve for easy adjustment achieving the perfect alignment for the wheels
- FITS MOST MODELS. Designed to fit most models of compact and standard size passenger cars and light trucks
Features & Benefits
- Designed specifically for use with the BJP18100 Ball Joint Press and locks in place on the rocker assembly
- Provides required support when installing Dodge 4500/5500 ball joints
- Unique adapter accommodates complex axle housing geometry
- Also works on 2008-2014 Dodge Ram and Dodge Sterling trucks
- Made from high-quality heat-treated alloy steel with black oxide finish
Features & Benefits
- Can be used to remove both tie rod ends and pitman arms of numerous car and light-duty truck applications, domestic and import, with a tie rod screw diameter up to 3/4".
- The swivel head of the forcing screw protects the threads of the tie rod.
- Provides an alternative, more effective method to removal than hammering.
- Has a working spread of 1-5/8".
Features & Benefits
- Can be used to remove both tie rod ends and pitman arms of numerous car and light-duty truck applications.
- Designed with pull travel of 2-1/4" with over an inch of jaw opening.
- The head of the forcing screw has a 3/8"-drive square drive connection.
- 1" maximum spread
Features & Benefits
- A heavy-duty tool for removing the larger pitman arms on various cars, SUVs, and light-duty trucks.
- The yoke is forged of high-grade allow steel and has been heat-treated for strength and durabilty.
- It has a pull of up 2-1/2" with a jaw opening of 1-5/16".
- 1-3/8" maximum spread
Features & Benefits
- Seperates the ball joint from the spindle on virtually all domestic and import vehicles, up to light-duty truck.
- Thread force screw contains a ball connection to reduce wear and friction during use.
- 3/16" maximum spread
Features & Benefits
- A versatile tool that can be utlilized on an array of of tie rod ends as well as ball joints including cars to light-duty trucks with various steering knuckle designs.
- Jaws designed for ultimate grip and a cup-style end on the forcing screw makes this tool a more effective method of removal.
- Causes less damage than other removal processes.
- This puller has a spread up to 4" and up to a 3-5/8" reach.
- 4" maximum spread
Features & Benefits
- Used for breaking free steering knuckle/suspension joints using an impact hammer
- Nut must be threaded all the way onto knuckle/suspension joints threaded shafts
- Can be used to remove Honda, Lexus and Toyota Wheel Studs
- Sizes included: M10x1.5, M12x1.25, M12x1.5, M14x1.5, M14x2.0, M16x1.5, M16x2.0 and M24x1.5
Features & Benefits
- Kit includes five of the most commonly used tools for servicing ball joints, pitman arms, and tie rod end of nearly all domestic and import vehicles.
- Each component is constructed of steel alloy and chrome-plated to provide strength and durability for a lifetime of use.
- Multiple puller sizes to remove tie rod ends and pitman arms from cars to light-duty trucks.
- Includes a ball joint spreader to be used on various applications.
- All items come organized in a durable, blow-molded case.
Features & Benefits
- Loosens hydraulic fittings on tractors, forklifts and heavy equipment
- Uses the force and vibration of an air hammer to fit into small spaces between hydraulic lines
- Reaches difficult line nuts with offset punch
- 30% more steel; 30% stronger
Features & Benefits
- Loosen fittings on steering, brake, AC, and fuel systems
- Uses the force and vibration of an air hammer
- Compact design fits where other wrenches wont
- Reaches difficult line nuts with offset punch
- 30% more steel; 30% stronger
Features & Benefits
- Loosens hydraulic fittings on tractors, forklifts and heavy equipment
- Uses the force and vibration of an air hammer
- Fits into small spaces between hydraulic lines
- Reaches difficult line nuts with offset punch
- 30% more steel; 30% stronger
Features & Benefits
- Loosen fittings on steering, brake, AC, and fuel systems
- Uses the force and vibration of an air hammer
- Compact design fits where other wrenches wont
- Reaches difficult line nuts with offset punch
- 30% more steel; 30% stronger
Features & Benefits
- Apply air hammer vibration and torque to any impact socket
- Utilize air hammer and punch to access inaccessible fasteners
- Remove most stubborn nuts and bolts by repetitive hammering
- Hypersonic vibration eliminates thread galling
- Square drive plug allows breaker bar and air hammer simultaneous operations
Features & Benefits
- Air hammer powered Shockit Sockets to access, loosen and remove frozen and obstructed O2 sensors
- Works when ratchets, wrenches and sockets don't fit
- Includes low-profile design for limited access and long profile design for deep recessed Ford, Toyota and Lexus applications
- Removes Nox sensors on Kenworth, Cummins, International, Detroil and Volvo diesel truck engines
- Non-slip self centering air hammer angled Shockit Punch for limited access applications
- 18mm dual sided tap/bottoming die for O2 sensor and mounting hole threads